The most integrated and cost effective DVB-S/S2 demodulator ready for:
LOS/NLOS digital data transmission
Syper is the latest generation of DVB-S and DVB-S2 receiver fully compliant to the standard. The Syper S/S2 demodulator is high performance demodulator-decoder for advanced DVB satellite reception. Syper S/S2 demodulator supports DVB-S as well as DVB-S2 in QPSK, 8PSK, 16APSK and 32APSK until 170MBps.
Syper S/S2 demodulator can be used either with LNB satellite blocks or with L-band receivers. In both cases, the Syper S/S2 receiver can be configured and driven by the user with the GUI. Syper S/S2 receiver is the first DVB-S2 demodulator able to provide five Input Stream Identifier (ISI), at the same time, on five ASI output ports. Thanks to the RF_Out output (copy of RF_In), it’s possible to cascade two demodulators for increasing the number of outputs ASI. It’s useful if there is more than 5 ISI in the multi-stream receiving. With a simple GUI, it’s possible to map any ISI to any ASI output ports.
Performance & Reliability:
All the modulations of EN 302 307 are demodulated. In the most robust MODCOD, the C/N can go below 0dB and the Syper S/S2 receiver will synchronize and demodulate correctly the input signal with an automatic MODCOD detection.
Full error monitoring facilities are available and signal statistics (C/N, FER, PER) are provided via a simple interface either by Ethernet port or by serial port.
Input frequency range: 950 MHz to 2150 MHz
Full compliance with DVB-S and DVB-S2 technology
CCM, VCM and ACM support
DVB-S2 Multi-Stream compliant
Up to 5 independent ASI outputs
Up to 170Mbps useful bit rate
Single power supply from 90 to 240 VAC