|
ETI Input:
 Fully compliant with ETSI 300799 ETI interface standard
Data Bit Rate: 2.048Mb/s
Data Format: NI(G703), NA5376(G704), NA5592(G704)
Redundancy Mode: Manuel, Automatic and Seamless
Connector type: BNC female, Impedance 75Ohm
Modulation and channel coding:
Fully compliant with ETS 300401 standard
Modulation: I,II,III,VI modes
Support Dynamic Configuration
Channel Bandwidth: 1.536MHz
IF Output Option:
Central frequency: 30MHz to 40MHz, Step 1Hz
Signal level(Main):0dBm to -10dBm by 0.1dB step
Signal stability: +/- 0.5dB
I/Q Amplitude Error: <0.05%
I/Q Phase Error: <0.05 degree
Modulation error ratio(MER): >40dB
Shoulder: >50dB @ +/-970kHz from central frequency
Spurious: 55dB relative to total power
Return loss: >15dB
Connector type: BNC female, Impedance 75 Ohm
Test Signal Modes:
3G Mode
SFN Test Mode
Spectrum Hole
DAB/T-DMB Network:
SFN: Offset delay insertion, 0-1 second, step 100ns
MFN: Static delay insertion, 0-1 second, step 100ns
ETI Control for DAB Mode, TII, Offset delay
TII Infromation Insertion: Main ID, Sub ID
Alarm Management:
2 Contact Relays to trigger external equipment
Alarm List: ETI Sync Loss, Bit Rate Overflow,
SFN Loss, Ext 10MHz Loss, 1pps Loss
Control Mode:
Local control: 6 buttons, LCD screen, LED
Remote control: RS232 & RS485 or WEB browser through IP Ethernet RJ-45 in option
|
|
RF Output:
Frequency: L band or VHF bands
Signal level(Main): 0dBm +/- 2dB
Attenuation: 10dB adjustable by 0.1dB step
Signal stability: +/- 0.1dB
Modulation error ratio(MER): >38dB
Shoulder: >48dB @ +/-1MHz from central frequency
Spurious: 50dB relative to total power?
Return loss: >10dB
Connector type: N female, Impedance 50 Ohm
RF Mute Mode: Direct and Progressive
RF Amplifier Option:
Ultra linear amplifier for VHF, UHF Bands
Gain 15- 25dB, Gain Flatness <1dB
Gain Stability <0.1dB
Return loss: >15dB
Extra –90dB Attenuator Option:
Attenuation bandwidth: 48-900MHz
Attenuation Step 1dB, Flatness <2dB
Clock Reference:
Internal 10MHz
Stability: 0.5ppm(typ); 3.0ppm(full temperature range)
Aging: 0.8ppm; Output level: 0dBm +/- 3dB
External 10MHz
Input level: -5dBm to +10dBm
Input connector type: N female, 50 Ohm
External 1pps reference
Input level: TTL level 5 KOhms; Pulse width: 1us
Input connector type: BNC female
Physical conditions:
Power supply:AC 220V+/-10%, 80W
Operating temperature: 0-50 degrees
Storage conditions: -10-70 degrees, humidity 10%-80% at 50 degrees
Dimension: L=540mm,W=483mm, H=44mm (1RU)
Weight: Net 7 kg, Gross 10 kg
|
