High Power Digital TV Transmitter , Symphony-1200W

　High Power Digital TV Transmitter, Model:Symphony-1200W

Main Feature

　　     　 Support major digital terrestrial and mobile TV standards, including DVB-T/T2, ISDB-T, ATSC, DTMB, DVB-H, FLO, CMMB
　　     　 Dual-exciter in redundancy mode
　　     　 2 TS ASI inputs in redundancy mode
　　     　 PID Filtering and Insertion
　　     　 Support 2k, 4k, 8k FFT modes
　         　 Guard Interval: 1/4, 1/8, 1/16, 1/32
　　     　 FEC: 1/2, 2/3, 3/4, 5/6, 7/8
　　     　 Constellation: QPSK, 16QAM, 64QAM
　　     　 RF output power 1200W in 22RU Rack
　　     　 RF channel bandwidth: 6MHz, 7MHz, 8MHz
　　     　 Output frequency agile from 470MHz to 862MHz
　　     　 LDMOS wide band UHF amplifier technology
　　     　 Powerful linear and non-linear pre-correction
　　     　 Support crest factor adjustment
　　     　 Support SFN and MFN with MIP processing
　　     　 External and internal 10MHz and 1PPS inputs
　　     　 Front panel LED status monitoring and LCD menu
　　     　 RS232 control and supervision or IP Web browser in option
　　     　 External and internal 10MHz and 1PPS inputs
　　     　 Front panel LED status monitoring and LCD menu
　　     　 IP Web control and supervision, SNMP in option
　　     　 Satellite input and built-in GPS in option

Technical Specification

Input:
　　　 Support DVB-T/T2,ISDB-T,ATSC,DTMB, DVB-H, FLO,CMMB standards
　　　 2 x ASI inputs in redundancy mode with clever switching, bit rate adaptation
　　　 PID Filtering Insertion for TV program cut and Insertion
　　　 Connector type: 2 BNC female, Impedance 75Ohm
　　　 Satellite input in option

RF Output:
Central frequency: 470MHz to 862MHz
　　　 RF output power: 100W/300W digital
　　　 Channel bandwidth: 6MHz, 7MHz, 8MHz
　　　 Signal stability: +/- 0.5dB
　　　 Modulation Error Ratio(MER):>33dB in DVB
　　　 Shoulders: >38dBc@±4.2 MHz in DVB(8MHz)
　　　 VSWR: 3:1 (Self Protected)
　　　 Connector type: 7/16 DIN female, Impedance 50Ohm

Pre-correction:
　　　 Linear pre-correction: amplitude and group delay
　　　 Non linear pre-correction: AM-AM, AM-PM

Adjustable Crest Factor :
　 Crest factor range: 8-20dB
　　　 Crest factor optimization range: 1-255

Clock Reference:
　　　    Automatic 10MHz and 1PPS loss management
　　　    Internal 10MHz
　　　　   Frequency derivation:<+/-0.3ppm; <1Hz with GPS
　　　　   Output level: 0dBm +/- 3dB
　　　　External GPS
　　　　 10MHz input level: -15dBm to +15dBm
　　　　 1PPS input level: TTL level, pulse width: 1us
　　　　Built-in GPS receiver option
　　　　Built-in satellite receiver option

Control Mode:
　　　 Local control: buttons, LCD screen, LEDs
　　　　Remote control: User friendly interface through RS-232 port and IP Web browser, SNMP in option

Physical:
　         Power supply: AC 180-264V / 50-60Hz
　　　   Power Consumption: < 7000W
　　　   Operating temperature: -5 to 45 degrees
　　　   Storage condition: -20 to 80 degrees
　　　   Dimension:482mm(W)x500mm(D)x22RU(H)
　　　   Weight:130kg (no rack)